MCP100
2 to 10 channels design simultaneous or individual mode available 3 methods of electrochemical experiment2 Basic channels, expandable to 10 maximum channels
Simultaneous Mode： Multiple electrodes can be tested together under the same experimental conditions to ensure the reliability and reproducibility of experimental data.
Individual Mode： Each channel can perform different detection methods on the same sample and more experimental data can be obtained faster.
CV (Cyclic Voltammetry)
IT (Amperometry)
OCP (Open-Circuit Potential)
| Main Function | (A)Multi-channels with individual control of 3 electrodes system. (B)Multi-channels of electrochemical graphs (including CV,IT,OCP) showing simultaneously or individually. (C)Execution of electrochemaical methods continuously and automatically. (D)Save data automatically. (E)Data Analysis automatically. |
|---|---|
| Electrochemical Method | (A)Cyclic Voltammetry (CV) (B)Amperometry (IT) (C)Open circuit potential (OCP) |
| Range | (A)Potentail range: +2~-2V(V) (B)Measured current range: 10-2~10-10 (C)Channels:2~10 |
| Others | (A)Potential resolution: 1mV (B)Potential accuracy: +- 0.1% (C)Measured currrent resolution: 0.006% current range (1.2fA on 10pA) (D)Sampling rate: 1ms (E)Power requirement: AC100~250V,50~60Hz,40W |
| Size | 230(L)*370(W)*130(H)mm |
 |  |  |  |  |
|---|---|---|---|---|
| ECWP100single | ECWP100plus | MCP100 | ECAS100 | ACIP100 |
| wireless | Wireless | USB powered | USB and battery powered + Offline use | USB and battery powered + Offline use |
| - | - | - | Simulation（editable chip）Note.1 | Simulation（editable chip）Note.1 |
| SPE availabel | SPE availabel | SPE availabel | SPE availabel | SPE availabel |
| 3 clips connector available | 3 clips connector available | 3 clips connector available | 3 clips connector available | 3 clips connector available |
| Single-channel | Maximum 8 channels | Channels 2-8 are available | Single-channel | Single-channel |
| Need PC | Need PC | Need PC | 5.0 touch panel | 5.0 touch panel |
| CV/LSV/SWV/DPV/IT/OCP | CV/LSV/SWV/DPV/IT/OCP | CV/IT/OCP | CV/LSV/SWV/DPV/IT/OCP | CV/IT/OCP |
| - | - | - | - | ACIP |
| - | - | - | - | IMPT |
| - | - | - | - | IMPE |
| +2~-2V | +2~-2V | +2~-2V | +2~-2V | +2~-2V |
| 10-3~10-9A | 10-3~10-9A | 10-2~10-10A | 10-2~10-10A | 10-2~10-10A |
| Detail-Info | Detail-Info | Detail-Info | Detail-Info | Detail-Info |
Note1：Simulation function-The test steps can be burned into a replaceable chip, so a large number of test samples can be tested offline, and the required values can be read directly on the panel .That will simulate the process of product model development.
More Details